Setup Canon Pixma MG2522 Setup Quickly 

This post will Guide you to Setup Canon Pixma MG2522 Setup Quickly

* If the printer cannot be recognized and not Connected to Computer PC. Make sure the computer connection is working. It could show depending on the computer you are using.

Verify you have the USB Connection Plugged is properly connected to the device and also the computer.

Check 2. Follow the instructions that follow to join the PIXMA MG2522 to the computer.

again.

1. Press and hold the Power Button and Shut off or Unplug the Power Cable Directly From the PIXMA MG2522.

2. Disconnect the USB cable Connection from both the PIXMA MG2522 and computer, then reconnect it.

3. Switch the PIXMA MG2522 on.

Check3. If you are unable to resolve the issue Follow the steps below to restore the

MP Drivers.

1. Check and see Cancel and Do Button Labelled as Cancel.

2. Go to the Main Screen / Start over the screen. The main installation Error or failure screen.

3. Select Exit or Quit from the "PIXMA MG2522 " screen Then, remove the DISK-ROM.

4. Switch off the PIXMA MG2522.

5. Restart your computer PC.

6. Check to ensure that there is no software for your application MP driver is running.

7. Insert the CD-ROM in a second time after which you can Install the Drivers for MP.

* In other situations:

Reinstall the MP Drivers.

In the event that Canon MP Drivers weren't installed correctly remove the driver from Program list or Uninstall it from appwiz.cpl then reboot your Computer PC, then

Open the Setup.exe Run the Installation of Canon Setup Drivers again.

Check the Logs and appwiz.cpl Remove the Unused and Unwanted MP Drivers

If you want to reinstall the Canon MP printer Drivers Install the MP Drivers by using the Setup software on the DISK-ROM, or download them using Official Printer website.

Note

* If the installation setup program was forced to shut down that also because of an Microsoft Windows error The system could be in an

An unstable state means which means that you might not be able to install the drivers. Make sure to restart your computer prior to installation again or reinstalling.