Setup Canon Pixma MG2522 Setup Quickly 

This post will Guide you to Setup Canon Pixma MG2522 Setup Quickly

* If the printer cannot be recognized and not Connected to Computer PC. Make sure the computer connection is working. It could show depending on the computer you are using.

Verify you have the USB Connection Plugged is properly connected to the device and also the computer.

Check 2. Follow the instructions that follow to join the PIXMA MG2522 to the computer.

again.

1. Press and hold the Power Button and Shut off or Unplug the Power Cable Directly From the PIXMA MG2522.

2. Disconnect the USB cable Connection from both the PIXMA MG2522 and computer, then reconnect it.

3. Switch the PIXMA MG2522 on.

Check3. If you are unable to resolve the issue Follow the steps below to restore the

MP Drivers.

1. Check and see Cancel and Do Button Labelled as Cancel.

2. Go to the Main Screen / Start over the screen. The main installation Error or failure screen.

3. Select Exit or Quit from the "PIXMA MG2522 " screen Then, remove the DISK-ROM.

4. Switch off the PIXMA MG2522.

5. Restart your computer PC.

6. Check to ensure that there is no software for your application MP driver is running.

7. Insert the CD-ROM in a second time after which you can Install the Drivers for MP.

* In other situations:

Reinstall the MP Drivers.

In the event that Canon MP Drivers weren't installed correctly remove the driver from Program list or Uninstall it from appwiz.cpl then reboot your Computer PC, then

Open the Setup.exe Run the Installation of Canon Setup Drivers again.

Check the Logs and appwiz.cpl Remove the Unused and Unwanted MP Drivers

If you want to reinstall the Canon MP printer Drivers Install the MP Drivers by using the Setup software on the DISK-ROM, or download them using Official Printer website.

Note

* If the installation setup program was forced to shut down that also because of an Microsoft Windows error The system could be in an

An unstable state means which means that you might not be able to install the drivers. Make sure to restart your computer prior to installation again or reinstalling.

Canon pixma tr8520 setup

 These instructions are for a Windows computer.

There are two sections to this specific setup:

Begin the setup process on your printer.

Run the setup and download the Setup.exe file on your computer

1.Start the procedure on your printer

 1.1 Switch the printer ON. If the printer performs cleaning, print head alignment, or another process, wait for it to finish.

1.2 Press the Network Status button (A) on the printer.

 1.3 Touch LAN settings on the Basic network information screen.

 1.4 Select Wireless LAN.

1.5 Select Wireless Lan setup.

1.6 Touch Easy Wireless Connect, then Select Yes.

1.7 When the canon printer preparation is complete, you will see this screen:

1.8 Return to the setup installation screen and continue with the setup.

2 Run the setup and download the file on your computer or laptop

2.1 First, you will need to get the setup file (set up can also be performed using the Setup CD-ROM). 

2.2 Read the information and note how to run the setup file. Click the Download button if the setup doesn't start automatically.

 2.3 Choose Begin Setup on the first screen.

 2.4 Opt for the area where you live, then After that.

 2.5 Select Yes on the license agreement.

 2.6 Choose Agree or Do Not Agree to the survey, then Next. 

2.7 Choose Yes on the Connection Method screen. 

2.8 Setup connection screen with Yes opted for

 2.9 Setup continues. 

If the Choose wireless router screen (below) appears, opt for the wireless router to connect to the printer, enter the Network Key (password), and choose Next. Note The screen below may not appear. You shuold Proceed to the next step if it doesn't.

 2.10 The network connection is complete. Opt for Next. 

2.11 The drivers will install. Opt for Begin to print a test page or Next to continue. 

2.12 Opt for Next from the Setup Finished page.

 2.13 Select any optional application software desired. Opt for Next. 

2.14 Select Next.

 2.15 Opt for Exit, and your setup is complete. 

Or, if you still need unable to Fix with Guides and need help, visit our Printer Community by clicking the button Chat to get the answer: